Quality Control Specialist
Simwon NA Corp Simwon NA Corp Kyle, TX Kyle, TX Full-time Full-time From $24.
52 an hour From $24.
52 an hour 2 days ago 2 days ago 2 days ago The Quality Control Specialist may visually inspect or manually test raw materials or complete products of automobile components, before, during, or after the manufacturing process.
Specialists may also run and monitor inspection equipment, as well as record and analyze quality data.
The main objective is to test the product for its intended use and make sure it performs up to the manufacturer's specifications.
May perform duties in a workstation, assembly line, measuring room, or a department office.
This position is also responsible for ensuring plant quality control procedures are being followed to prevent the production of bad or unacceptable blocks.
Principle Responsibilities Submit reports to Quality Control Manager.
The daily report should note QC activities being performed, any test reports of materials, any problems noted during the day Check and sign off on each pallet of the block to be shipped Periodically train production personnel per proper QC procedures Perform analysis of raw materials and designs for quality, cost, and effectiveness Maintain all equipment required for quality control testing Ensure QC check list is being followed and keep the finalized checklist for review Ensure parts meet above standard specifications and are approved acceptable to supply Perform complete layout inspection by measuring dimensions, such as length, height, and distance, between reference points, using precision instruments.
Visually compares work pieces against one another to assess/detect manufacturing variations in processes Assist and/or train operators on part visual acceptability, and measurement and process procedures as required Maintain record of inspections and prepares list of defects, interacts with other departments to ensure compliance with specification and to facilitate the acceptance of parts Perform all work safely in a fast-paced work environment.
CMM Operation and Programming Portable Scanner Operation Physical Requirements The ability to lift up to 25 pounds to move objects is required.
Must possess strength, stamina, and mobility to perform low physical work indoors with minimum exposure to dust.
Walking, lifting, reaching, stooping, standing, grasping, balancing, climb, kneeling, and crouching are generally required for some assignments.
Demonstrate the ability to hear and have specific vision abilities to adjust focus, in an environment subject to noise, dust, etc.
The office is located inside the plant with equipment noise and frequent interruptions such as phone calls and contact with staffs.
Qualifications Bachelor's Degree in Science or Mathematics or concentration Materials Science & Engineering(MSE) or Metallurgical Engineering Knowledge of computer and measuring instruments Experience with a manufacturing or processing company preferred Close attention to detail Good organizational and strong interpersonal skills Proficient, quick and, comfortable with personal computer navigation and operation Ability to work independently with limited supervision Flexibility based on plant production schedules Bilingual in English and Spanish or Korean is a big plus! Experience in inspection and measurement of auto body parts preferred Benefits 401(k) Health, Dental, Vision, Life Insurance Paid Time Off Job Type:
Full-time Pay:
From $24.
52 per hour Expected hours:
40 per week
Benefits:
401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule:
8 hour shift Day shift Monday to Friday Work setting:
In-person Office Ability to Relocate:
Kyle, TX 78640:
Relocate before starting work (Required) Work Location:
In person.
Estimated Salary: $20 to $28 per hour based on qualifications.
52 an hour From $24.
52 an hour 2 days ago 2 days ago 2 days ago The Quality Control Specialist may visually inspect or manually test raw materials or complete products of automobile components, before, during, or after the manufacturing process.
Specialists may also run and monitor inspection equipment, as well as record and analyze quality data.
The main objective is to test the product for its intended use and make sure it performs up to the manufacturer's specifications.
May perform duties in a workstation, assembly line, measuring room, or a department office.
This position is also responsible for ensuring plant quality control procedures are being followed to prevent the production of bad or unacceptable blocks.
Principle Responsibilities Submit reports to Quality Control Manager.
The daily report should note QC activities being performed, any test reports of materials, any problems noted during the day Check and sign off on each pallet of the block to be shipped Periodically train production personnel per proper QC procedures Perform analysis of raw materials and designs for quality, cost, and effectiveness Maintain all equipment required for quality control testing Ensure QC check list is being followed and keep the finalized checklist for review Ensure parts meet above standard specifications and are approved acceptable to supply Perform complete layout inspection by measuring dimensions, such as length, height, and distance, between reference points, using precision instruments.
Visually compares work pieces against one another to assess/detect manufacturing variations in processes Assist and/or train operators on part visual acceptability, and measurement and process procedures as required Maintain record of inspections and prepares list of defects, interacts with other departments to ensure compliance with specification and to facilitate the acceptance of parts Perform all work safely in a fast-paced work environment.
CMM Operation and Programming Portable Scanner Operation Physical Requirements The ability to lift up to 25 pounds to move objects is required.
Must possess strength, stamina, and mobility to perform low physical work indoors with minimum exposure to dust.
Walking, lifting, reaching, stooping, standing, grasping, balancing, climb, kneeling, and crouching are generally required for some assignments.
Demonstrate the ability to hear and have specific vision abilities to adjust focus, in an environment subject to noise, dust, etc.
The office is located inside the plant with equipment noise and frequent interruptions such as phone calls and contact with staffs.
Qualifications Bachelor's Degree in Science or Mathematics or concentration Materials Science & Engineering(MSE) or Metallurgical Engineering Knowledge of computer and measuring instruments Experience with a manufacturing or processing company preferred Close attention to detail Good organizational and strong interpersonal skills Proficient, quick and, comfortable with personal computer navigation and operation Ability to work independently with limited supervision Flexibility based on plant production schedules Bilingual in English and Spanish or Korean is a big plus! Experience in inspection and measurement of auto body parts preferred Benefits 401(k) Health, Dental, Vision, Life Insurance Paid Time Off Job Type:
Full-time Pay:
From $24.
52 per hour Expected hours:
40 per week
Benefits:
401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule:
8 hour shift Day shift Monday to Friday Work setting:
In-person Office Ability to Relocate:
Kyle, TX 78640:
Relocate before starting work (Required) Work Location:
In person.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
